Menzerna 1000 + 2500 + 3000 (3x 250 ml) Polishes 3-step paint correction

MENZERNA 1000 (250 ml)

Proven highly abrasive German-made polishing paste. Effectively levels even deep lacquer defects. Removes sanding with a granulation of 1500. Does not contain silicone. Minimized dusting during machine polishing. For use with foam and wool polishing pads. For best results after using Menzerna Power Gloss PG1000, give the paint surface a high gloss finish with finishing paste Menzerna Final Finish FF3000.

Directions for use:

For machine use: polish with an orbital or rotary polisher and polishing pads of the appropriate hardness. The optimal speed for rotary polishers is between 1200-1500 rpm. Remove paste residue with a microfiber towel.

Cut:

9/10

Gloss:

3/10

D

MENZERNA 2500 (250 ml)

Medium abrasive polishing paste. Great for eliminating scratches and paint defects. For a perfect effect after correction, use the paste Menzerna Final Finish 3000, which will provide a high gloss surface. The paste does not contain silicone in its composition. Minimal dusting during machine polishing. Can be used with sponge pads.

Directions for use:

• Manual application: apply the paste on the applicator, then polish in all directions until you get rid of unwanted defects. Remove excess paste with a dry microfiber.
• Machine application: apply the paste to the sponge in an orbital or rotary polisher, then polish at about 2000rpm until defects are removed. Wipe off excess paste with a microfiber.

Cut:

5/10

Gloss:

7/10

D

MENZERNA 3000 (250 ml)

Menzerna Final Finish it is a light-abrasive finishing polishing paste, which gives the surface of the lacquer an incredible shine. Effectively eliminates minor paint defects such as fine scratches, holograms. Removes sanding with a granulation of 2500.Does not contain silicone. Minimized dusting during machine polishing. For use with foam soft polishing pads.

Directions for use:

1. For manual use - apply the product to a manual polishing pad and polish in circular motions for removal of minor defects and shine. Remove paste residue with a microfiber towel.
2. For machine use - polish with an orbital or rotary polisher and polishing pads of the appropriate hardness. The optimal speed for rotary polishers is between 1200-2000 rpm. Remove paste residue with a microfiber towel.

Cut:

3/10

Gloss:

9/10