Menzerna 1100+2500+3800 3-step paint correction (3x 250 ml)

MENZERNA 1100 (250 ml)

Polishing product with high cutting power. Correction compared to other polishes is achieved in a much shorter time. Deep paint defects are effectively removed. It levels sanding with a granulation of 1200, and has no silicone. Provides reduced dusting during machine polishing. Can be used with wool and sponge polishing pads. For excellent results after use Menzerna Heavy Cut Compound 1100 give a high gloss finish with Menzerna Super Finish SF+3800 or Menzerna Final Finish FF3500.

Directions for use:

use with an orbital or rotary polisher and hard polishing pads or wool polishing pads. The optimal speed for a rotary polisher is between 1200-1800 rpm. Wipe off any remaining polish with a towel made of microfiber

Cut:

8/10

Gloss:

5/10

D

MENZERNA 2500 (250 ml)

Medium abrasive polishing paste. Great for eliminating scratches and paint defects. For a perfect effect after correction, use the paste Menzerna Final Finish 3000, which will provide a high gloss surface. The paste does not contain silicone in its composition. Minimal dusting during machine polishing. Can be used with sponge pads.

Directions for use:

• Manual application: apply the paste on the applicator, then polish in all directions until you get rid of unwanted defects. Remove excess paste with a dry microfiber.
• Machine application: apply the paste to the sponge in an orbital or rotary polisher, then polish at about 2000rpm until defects are removed. Wipe off excess paste with a microfiber.

Cut:

5/10

Gloss:

7/10

D

MENZERNA 3800 (250 ml)

Menzerna Super Finish Plus 3800 this is a new designation for the finishing paste PO85RD, which is appreciated by detailers all over the world. It is the first of the pastes that the German manufacturer has created for the perfect finish of scratch-resistant ceramic lacquers. The paste from the professional line used in German car factories to finish and shine new paints is now also available for car detailing enthusiasts. Thanks to the use of very finely ground abrasive particles, it allows to achieve a perfect finish and an ultra-glossy shine of the painted surface.

Silicone-free. Minimized dusting during machine polishing. For use with foam soft polishing pads.

Directions for use:

• For manual use - apply the product to a handheld polishing pad and polish in circular motions for removal of minor defects and shine. Remove paste residue with a microfiber towel.
• For machine use - polish with an orbital or rotary polisher and polishing pads of the appropriate hardness. The optimal speed for rotary polishers is between 1200-2000 rpm. Remove paste residue with a microfiber towel.

Cut:

2/10

Gloss:

10/10